Note:
– The engine oil temperature sensor and engine oil pressure sensor cannot be removed as a single unit. When replacing the engine oil temperature sensor or engine oil pressure sensor, replace the engine oil temperature sensor/engine oil pressure sensor.
– The i-stop OFF switch is integrated with the cluster switch.

1. Disconnect the negative battery terminal.
2. Disconnect the engine oil temperature sensor/engine oil pressure sensor connector.
3. Measure the resistance between engine oil temperature sensor/engine oil pressure sensor terminals E and C.

Relevant contents:

• Control system location, diagram, PCM and engine oil data reset [Skyactiv-G (with cylinder deactivation (e))]
• Revolution sensor, neutral sensor and engine coolant temperature (ETC) sensor [Skyactiv-G (with cylinder deactivation (e))]
• Mass air flow (MAF) sensor/intake air temperature (IAT) sensor no.1, mass air flow (MAF) sensor, intake air temperature (IAT) sensor and manifold absolute pressure (MAP) sensor [Skyactiv-G (with cylinder deactivation (e))]
• Barometric pressure (BARO) sensor, accelerator pedal position (APP) sensor and throttle position (TP) sensor [Skyactiv-G (with cylinder deactivation (e))]
• Fuel pressure sensor, air fuel ratio (A/F) sensor and heated oxygen sensor (HO2S) [Skyactiv-G (with cylinder deactivation (e))]
• Crankshaft position (CKP) sensor and camshaft position (CMP) sensor [Skyactiv-G (with cylinder deactivation (e))]
• Knock sensor (KS) and current sensor [Skyactiv-G (with cylinder deactivation (e))]
• Clutch stroke sensor, power brake unit vacuum sensor and ion sensor [Skyactiv-G (with cylinder deactivation (e))]
• Engine oil level sensor, exhaust shutter valve position sensor and coolant control valve position sensor [Skyactiv-G (with cylinder deactivation (e))]