Caution:
– There are two types of PCM settings. If the incorrect PCM is installed, it could cause interference with engine control.
– When replacing the PCM, verify the first four digits of the part number indicated on the PCM label before replacement, and replace the PCM with one having the same part number.

1. When replacing the PCM, perform the configuration using the following procedure.
2. Disconnect the negative battery terminal.
3. Remove the PCM and battery tray component as a single unit.
4. Remove in the order indicated in the table.

Relevant contents:

• Revolution sensor, neutral sensor and engine coolant temperature (ETC) sensor [Skyactiv-G (with cylinder deactivation (e))]
• Mass air flow (MAF) sensor/intake air temperature (IAT) sensor no.1, mass air flow (MAF) Sensor, intake air temperature (IAT) sensor and manifold absolute pressure (MAP) sensor [Skyactiv-G (with cylinder deactivation (e))]
• Barometric pressure (BARO) sensor, accelerator pedal position (APP) sensor and throttle position (TP) sensor [Skyactiv-G (with cylinder deactivation (e))]
• Fuel pressure sensor, air fuel ratio (A/F) sensor and heated oxygen sensor (HO2S) [Skyactiv-G (with cylinder deactivation (e))]
• Crankshaft position (CKP) sensor and camshaft position (CMP) sensor [Skyactiv-G (with cylinder deactivation (e))]
• Knock sensor (KS) and current sensor [Skyactiv-G (with cylinder deactivation (e))]
• Engine oil temperature sensor/engine oil pressure sensor and i-stop off switch [Skyactiv-G (with cylinder deactivation (e))]
• Clutch stroke sensor, power brake unit vacuum sensor and ion sensor [Skyactiv-G (with cylinder deactivation (e))]
• Engine oil level sensor, exhaust shutter valve position sensor and coolant control valve position sensor [Skyactiv-G (with cylinder deactivation (e))]