Common rail, injection pipe and lower case [Skyactiv-D 1.8]
Caution:
– The bolts shown in the figure may loosen when removing the fuel injector bracket because the nuts assembled to the bolts are removed. Tighten the bolts shown in the figure to the specified torque before installing the fuel injector bracket.
| Mazda CX-30 2019-2024 |
| 1. Common rail removal/installation. [Skyactiv D 1.8 (with cylinder deactivation E))]. |
| 2. Common rail inspection. [Skyactiv D 1.8 (with cylinder deactivation E))]. |
| 3. Fuel tank removal/installation. [Skyactiv D 1.8 (with cylinder deactivation E))]. |
| 4. Fuel tank inspection. [Skyactiv D 1.8 (with cylinder deactivation E))]. |
1. Disconnect the negative battery terminal.
2. Remove the engine cover.
3. Complete the “BEFORE SERVICE PRECAUTION”.
Relevant contents:
- Fuel system, before and after service, fuel draining procedure [Skyactiv-D 1.8]
- Fuel tank, jet pump, fuel-filler pipe and non-return valve [Skyactiv-D 1.8]
- Quick release connector (fuel system), fuel injector, fuel filter body and fuel filter [Skyactiv-D 1.8]
- Fuel filter water draining, fuel check valve and fuel feed valve [Skyactiv-D 1.8]
- Fuel pressure relief valve, suction control valve and fuel filter [Skyactiv-D 1.8]
- Fuel warmer, sedimentor switch and supply pump inspection [Skyactiv-D 1.8]