Fuel filter water draining, fuel check valve and fuel feed valve [Skyactiv-D 1.8]
Warning:
– The fuel feed valve cannot be removed as it is integrated with the lower case.
– Fuel feed valve cannot perform inspecting with a single article.
| Mazda CX-30 2019-2024 |
| 1. Fuel filter water draining. [Skyactiv D 1.8 (with cylinder deactivation (E))]. |
| 2. Fuel check valve removal/installation. [Skyactiv D 1.8 (with cylinder deactivation (E))]. |
| 3. Fuel check valve inspection. [Skyactiv D 1.8 (with cylinder deactivation (E))]. |
| 4. Fuel feed valve removal/installation inspection. [Skyactiv D 1.8 (with cylinder deactivation (E))]. |
1. Disconnect the negative battery terminal.
2. Remove the floor under cover No.2 (LH).
3. Disconnect the sedimentor switch connector and wiring harness clip.
Relevant contents:
- Fuel system, before and after service, fuel draining procedure [Skyactiv-D 1.8]
- Fuel tank, jet pump, fuel-filler pipe and non-return valve [Skyactiv-D 1.8]
- Quick release connector (fuel system), fuel injector, fuel filter body and fuel filter [Skyactiv-D 1.8]
- Fuel pressure relief valve, suction control valve and fuel filter [Skyactiv-D 1.8]
- Fuel warmer, sedimentor switch and supply pump inspection [Skyactiv-D 1.8]
- Common rail, injection pipe and lower case [Skyactiv-D 1.8]