Quick release connector (fuel system), fuel injector, fuel filter body and fuel filter [Skyactiv-D 1.8]
Warning:
– Fuel is a very flammable liquid. If fuel spills or leaks from the pressurized fuel system, it will cause serious injury or death and facility breakage. Fuel can also irritate skin and eyes. To prevent this, always complete the “Fuel Line Safety Procedure”, while referring to the “BEFORE SERVICE PRECAUTION”.
| Mazda CX-30 2019-2024 |
| 1. Quick release connector (fuel system) removal/installation. [Skyactiv D 1.8 (with cylinder deactivation (E))]. |
| 2. Fuel injector removal/installation inspection. [Skyactiv D 1.8 (with cylinder deactivation (E))]. |
| 3. Fuel filer body removal/inspection. [Skyactiv D 1.8 (with cylinder deactivation (E))]. |
| 4. Fuel filter replacement. [Skyactiv D 1.8 (with cylinder deactivation (E))]. |
1. Disconnect the negative battery terminal.
2. Complete the “BEFORE SERVICE PRECAUTION”.
3. Remove the floor under cover No.2 (LH).
Relevant contents:
- Fuel system, before and after service, fuel draining procedure [Skyactiv-D 1.8]
- Fuel tank, jet pump, fuel-filler pipe and non-return valve [Skyactiv-D 1.8]
- Fuel filter water draining, fuel check valve and fuel feed valve [Skyactiv-D 1.8]
- Fuel pressure relief valve, suction control valve and fuel filter [Skyactiv-D 1.8]
- Fuel warmer, sedimentor switch and supply pump inspection [Skyactiv-D 1.8]
- Common rail, injection pipe and lower case [Skyactiv-D 1.8]