Fuel warmer, sedimentor switch and supply pump [Skyactiv-D 1.8]
Warning:
– Fuel is highly flammable and dangerous. Fuel line spills and leakage can cause serious injury or death, and damage to equipment. If fuel comes into contact with the skin and eyes it will cause irritation. To prevent this, always perform the “Fuel Line Safety Procedure” referring to the “BEFORE REPAIR PROCEDURE”
– A person charged with static electricity could cause a fire or explosion, resulting in death or serious injury. Before servicing the fuel system, make sure to discharge static electricity by touching a vehicle.
| Mazda CX-30 2019-2024 |
| 1.Fuel warmer inspection. [Skyactiv D 1.8 (with cylinder deactivation (E))]. |
| 2. Sedimentor switch inspection. [Skyactiv D 1.8 (with cylinder deactivation (E))]. |
| 3. Supply pump removal/installation. [Skyactiv D 1.8 (with cylinder deactivation (E))]. |
| 4. Supply pump inspection. [Skyactiv D 1.8 (with cylinder deactivation (E))]. |
1. Connect the M-MDS to the DLC-2.
2. Perform the DTC inspection using the M-MDS.
Relevant contents:
- Fuel system, before and after service, fuel draining procedure [Skyactiv-D 1.8]
- Fuel tank, jet pump, fuel-filler pipe and non-return valve [Skyactiv-D 1.8]
- Quick release connector (fuel system), fuel injector, fuel filter body and fuel filter [Skyactiv-D 1.8]
- Fuel filter water draining, fuel check valve and fuel feed valve [Skyactiv-D 1.8]
- Fuel pressure relief valve, suction control valve and fuel filter [Skyactiv-D 1.8]
- Common rail, injection pipe and lower case [Skyactiv-D 1.8]