GPF pressure sensor, NOx sensor and swirl control valve position sensor [Skyactiv-x 2.0]

Caution:
– A hot engine can cause severe burns. Turn off the engine and wait until it is cool before removing the starter.
– Do not disconnect the connector between the NOx sensor control module and NOx sensor. Otherwise, it could adversely affect the NOx sensor control module.
– Do not disconnect the connector between the NOx sensor control module and NOx sensor. Otherwise, it could adversely affect the NOx sensor control module.

Mazda CX-30 2019-2024
1. GPF pressure sensor removal installation inspection. [Skyactiv X 2.0].
2. NOx sensor removal installation inspection. [Skyactiv X 2.0].
3. Swirl control valve position sensor removal installation. [Skyactiv X 2.0].
4. Swirl control valve position sensor inspection. [Skyactiv X 2.0].

1. Disconnect the negative battery terminal.
2. Remove the tunnel cover.
3. Remove floor under cover No.1.
4. Disconnect the NOx sensor control module connector.