Note:
– Because the APP sensor is integrated in the accelerator pedal, replacing the APP sensor includes replacement of the accelerator pedal.
– The TP sensor cannot be removed as a single unit. When replacing the TP sensor, replace it together with the throttle body as a single unit.

1. Connect the M-MDS to the DLC-2.
2. Switch the ignition ON (engine on).
3. Warm up the engine to normal operating temperature.
4. Access the following PIDs using the M-MDS.

Relevant contents:

• Control system location, diagram, PCM, engine coolant temperature (ECT) sensor [Skyactiv-x 2.0]
• Camshaft position (CMP) crankshaft position (CKP) sensor, PCM, gasoline particulate filtet data reset and compulsory gasoline particulate filter [Skyactiv-x 2.0]
• Fuel injection, revolution sensor, neutral sensor, engine coolant temperature (ECT) sensor and water pressure sensor [Skyactiv-x 2.0]
• Fresh-air duct valve position sensor, mass air flow (MAF) sensor and intake air temperature (IAT) sensor No.1 [Skyactiv-x 2.0]
• Manifold absolute pressure (MAP) sensor/intake air temperature (IAT) sensor no.2, boost air pressure sensor/boost air temperature sensor and barometric pressure (BARO) sensor [Skyactiv-x 2.0]
•  Heated oxygen sensor (HO2S), crankshaft position (CKP) sensor and camshaft position (CMP) sensor [Skyactiv-x 2.0]
• Air bypass valve position sensor, EGR valve position sensor, EGR pressure sensor, cylinder pressure sensor and air bypass valve position sensor [Skyactiv-x 2.0]
• Boost air temperature sensor, engine oil temperature sensor and EGR valve position sensor [Skyactiv-x 2.0]
• I-stop off switch, clutch stroke sensor and engine oil level sensor [Skyactiv-x 2.0]
• Exhaust shutter valve position sensor, supercharger speed sensor anf boost pressure sensor [Skyactiv-x 2.0]
• High fuel pressure sensor/high fuel temperature sensor and low fuel pressure sensor/low fuel temperature sensor [Skyactiv-x 2.0]
• GPF pressure sensor, NOX sensor and swirl control valve position sensor [Skyactiv-x 2.0]