id01101a950100

D-code

Open Capsule Cover

1.Open in the order indicated in the table.

ac6wzw00000012

Opening capsule cover note

1.Open the capsule cover as shown in the figure.

ac6wzw00000013

Symbol	Content
	Servicing procedure

Closing capsule cover note

1.Close the capsule cover as shown in the figure.

ac6wzw00000014

Symbol	Content
	Servicing procedure

Remove Front Under Cover No.2

1.Remove using the procedure shown in the figure.

azzdjw00000583

Step	Part name
1	Bolt	11 N·m {110 kgf·cm, 95 in·lbf}
2	Fastener	—
3	Front under cover No.2	—

Remove Water Pump Drive Belt

1.Remove in the order indicated in the table.

azzdjw00004394

Water pump drive belt removal note

1.Apply a cloth to the water pump drive belt as shown in the figure.

azzdjw00004395

2.Pull the cloth in the direction of the arrow and rotate the crankshaft pulley clockwise.

azzdjw00004396

3.Remove the water pump drive belt.

Water pump drive belt installation note

1.Set one side of the water pump drive belt in the groove of the crankshaft pulley.

2.Set the other side of the water pump drive belt in the step of the water pump pulley.

azzdjw00004397

3.Pushing up the belt so that it is fitted in from the step of the water pump pulley to the groove of the pulley, rotate the crankshaft pulley clockwise.

azzdjw00004398

4.After the belt is installed, rotate the crankshaft pulley clockwise approx. 180° and verify that the water pump drive belt is installed correctly.

• If the belt ribs and the pulley grooves are not engaged correctly, remove the belt and reinstall it.

Install in Reverse Order of Removal

1.Install in the reverse order of removal.