Warning:
Hot engines and engine oil can cause severe burns. Turn off the engine and wait until it and the engine oil have cooled.
A vehicle that is lifted but not securely supported on safety stands is dangerous. It can slip or fall, causing death or serious injury. Never work around or under a lifted vehicle if it is not securely supported on safety stands.
 Continuous exposure to USED engine oil has caused skin cancer in laboratory mice. Protect your skin by washing with soap and water immediately after working with engine oil.
Replacement part:
O-ring
Quantity: 2
Location of use: oil cooler.
Steps:
1. Disconnect the negative battery terminal.
2. Remove the front under cover No.2.
3. Drain the engine coolant.
4. Remove the seal plate.
5. Remove in the order indicated in the table.
6. Install in the reverse order of removal.
7. Refill the engine coolant.

1: Water hose.
2. Oil cooler.

Oil Cooler Installation Note
Tighten the bolts in the order shown in the figure.