COOLING SYSTEM LOCATION AND SERVICE WARNINGS [SKYACTIV-X 2.0]
Cooling system location index
| NO | Name |
|---|---|
| 1 | Coolant reserve tank |
| 2 | Cooling system cap |
| 3 | Water-cooled charge air cooler reserve tank |
| 4 | Water-cooled charge air cooler reserve tank cap |
| 5 | Radiator |
| 6 | Coolant Switching Valve (CSV) |
| 7 | Water pump |
| 8 | Electric Thermostat |
| 9 | Thermostat |
| 10 | Electric Water Pump |
| 11 | Cooling Fan Motor |
Cooling system service warnings
Warning
– If the cooling system cap or the water-cooled charge air cooler reserve tank cap is removed when the engine is hot, steam and boiling water may be injected, causing severe burns or severe injury. Perform the removal of the cooling system cap and water-cooled charge air cooler reserve tank cap when the engine is cool.
– Turn off the engine and wait until it is cool. Even then, be very careful when removing the cap. Wrap a thick cloth around it and slowly turn it counterclockwise to the first stop. Step back while the pressure escapes.
– When you are sure all the pressure is gone, press down on the cap using the cloth, turn it, and remove it.
– Depending on the vehicle, the cooling fan may operate suddenly even when the ignition is off. Therefore, keep hands and tools away from the cooling fan even if the cooling fan is not operating to prevent injury to personnel or damage to the cooling fan. Always disconnect the negative battery cable when servicing the cooling fan or parts near the cooling fan.