Intake shutter valve initialization, engine oil, supply pump, fuel injector, air fuel ratio (A/F) sensor, diesel particulate filter data rest, compulsory diesel particulate filter regeneration [Skyactiv-D 1.8]
Caution:
– The intake shutter valve initialization can be performed using the M-MDS. For details, follow the instructions displayed on the M-MDS.
– If the engine oil was replaced, perform the engine oil data reset to reset the engine oil replacement period calculation data recorded in the PCM, regardless of whether or not the wrench indicator light is turned on.
– The supply pump data reset can be performed using the M-MDS. For details, follow the instructions displayed on the M-MDS.
Mazda CX-30 2019-2024 |
1. Intake shutter valve initialization. [Skyactiv-D 1.8] |
2. Engine oil, Supply pump, Fuel injector, Air fuel ratio (A/F) sensor data reset. [Skyactiv-D 1.8] |
3. Diesel particulate filter data reset. [Skyactiv-D 1.8]. |
4. Compulsory diesel particulate filter regeneration. [Skyactiv-D 1.8] |
1. Remove the engine cover.
2. Remove the insulator.
3. Meet the implementation condition for compulsory DPF regeneration.
Relevant contents:
- Control system location, diagram, PCM and accelerator pedal position (APP) sensor [Skyactiv-D 1.8]
- Mass air flow (MAF) sensor, intake air temperature (IAT) sensor, engine oil coolant temperature (ECT) sensor and boost air temperature sensor [Skyactiv-D 1.8]
- Fuel pressure sensor, camshaft position (CMP) sensor, crankshaft position (CKP) sensor, PCM data reset and barometric pressure (BARO) sensor [Skyactiv-D 1.8]
- Timing chain learning, mass air flow sensor, intake air temperature sensor, revolution sensor, neutral sensor [Skyactiv-D 1.8]
- Manifold absolute pressure (map) sensor/boost air temperature sensor, barometric pressure sensor, accelerator pedal position sensor, air fuel ratio sensor and current sensor [Skyactiv-D 1.8]
- Exhaust gas temperature sensor, fuel temperature sensor, fuel injector injection amount correction and exhaust gas pressure sensor [Skyactiv-D 1.8]
- Engine oil temperature sensor/engine oil pressure sensor intake shutter valve position sensor, blow-by heater and i-stop off switch [Skyactiv-D 1.8]
- Clutch stroke sensor, power brake unit vacuum sensor, engine oil level sensor and exhaust shutter valve position sensor [Skyactiv-D 1.8]
- HP-EGR control valve position sensor and LP-EGR control valve position sensor [Skyactiv-D 1.8]
- Actuator position sensor (turbocharger with variable turbine geometry), coolant control valve position sensor and exhaust shutter valve initialization [Skyactiv-D 1.8]
- EGR temperature sensor inspection, pm sensor and NOx sensor [Skyactiv-D 1.8]