Fuel pressure sensor, camshaft position (CMP) sensor, crankshaft position (CKP) sensor, PCM data reset and barometric pressure (BARO) sensor [Skyactiv-D 1.8]

Caution:
– The fuel pressure sensor cannot be removed as a single unit. When replacing the fuel pressure sensor, replace it together with the fuel injector as a single unit.
– When replacing the CMP sensor, make sure there is no foreign matter on it such as metal shavings. If it is installed with foreign matter, the sensor output signal will malfunction resulting from fluctuation in magnetic flux and cause a deterioration in engine control.
When foreign material such as an iron chip is on the CKP sensor, it can cause abnormal output from the sensor because of flux turbulence and adversely affect the engine control. Be sure there is no foreign material on the CKP sensor when replacing.

Mazda CX-30 2019-2024
1. Fuel pressure sensor removal installation inspection. [Skyactiv-D 1.8]
2. Camshaft position (CMP) sensor removal installation inspection. [Skyactiv-D 1.8]
3. Crankshaft position (CKP) sensor removal installation inspection. [Skyactiv-D 1.8].
4. Barometric pressure (BARO) sensor inspection. [Skyactiv-D 1.8]

1. urn the steering wheel to full right lock.
2. Disconnect the negative battery terminal.
3. Lift up the vehicle.
4. Remove the front splash shield (RH).

PCM data reset:
note:
The PCM data reset can be performed using the M-MDS. For details, follow the instructions displayed on the M-MDS.
1. Connect the M-MDS.
2. Perform the PCM data reset.