High pressure fuel pump, quick release connector and fuel injector [Skyactiv-x 2.0]
Warning:
– When inspecting or repairing the fuel system, always proceed with the diagnostics while verifying the [warnings] in the procedure. Not heeding the warnings could lead to an accident which could cause serious injury or death, and damage to equipment.
| Mazda CX-30 2019-2024 |
| 1. High pressure fuel pump removal/installation. [Skyactiv X 2.0 (with cylinder deactivation (E))]. |
| 2. High pressure fuel pump inspection. [Skyactiv X 2.0 (with cylinder deactivation (E))]. |
| 3. Quick release connector. [Skyactiv X 2.0 [with cylinder deactivation (E))]. |
| 4. Fuel injector removal/installation. [Skyactiv X 2.0 [with cylinder deactivation (E))]. |
| 5. Fuel injector inspection. [Skyactiv X2.0 (with cylinder deactivation (E))] |
1. Connect the M-MDS to the DLC-2.
2. Start the engine and warm it up.
3. Perform the KOER self-test and verify that none of the following DTCs is detected.
P0201:00, P0202:00, P0203:00, P0204:00
Relevant contents:
- Fuel system location index, fuel system flow diagram, before service precaution and after service precaution [Skyactiv-X 2.0]
- Fuel line pressure inspection, fuel draining procedure, fuel tank removal/installation inspection [Skyactiv-x 2.0]
- Fuel-filler pipe removal/installation, non-return valve inspection and fuel pump unit [Skyactiv-x 2.0]
- Fuel distributor, fuel filter (high-pressure), injection pipe and fuel pump control module [Skyactiv-x 2.0]