How to oil filrer replacement Mazda CX-30?

Oil Filter Replacement (Service hole cover type A)
1. Remove the front under cover No.2.(see front under cover No.2).
2. Remove the oil filter using a cup-type oil filter wrench (commercially available: nominal diameter: 67 mm {2.6 in}, 14 sided).

3. Clean the oil filter installation surface of the oil filter body using a clean cloth.
4. Apply engine oil to the oil filter O-ring.
5. Tighten the oil filter using a cup-type oil filter wrench and according to the instruction on the package or side of the oil filter.
6. Start the engine and verify that there is no oil leakage. (If there is oil leakage, repair or replace the applicable part.).
7. Inspect the engine oil amount.
8. Install the front under cover No.2.

Oil Filter Replacement (Service hole cover type B)
1. Remove the service hole cover (installed to front under cover No.2).
2. Remove the oil filter using a cup-type oil filter wrench (commercially available: nominal diameter: 67 mm {2.6 in}, 14 sided).

4. Apply engine oil to the oil filter O-ring.
5. Tighten the oil filter using a cup-type oil filter wrench and according to the instruction on the package or side of the oil filter.
6. Start the engine and verify that there is no oil leakage.
7.  Inspect the engine oil amount.
8. Install the service hole cover.