PID/DATA CLIMATE CONTROL UNIT FULL-AUTO AIR CONDITIONER

Simulation itemUnit/OperationData contentsOutput part name
CLIMATE_STATStopped/IP-ESU Indicater all ON Control•  Stopped: All of the indicators, display panel, and switch back lights on the climate control unit are turned off.•  IP-ESU Indicater all ON Control: All of the indicators, display panel, and switch back lights on the climate control unit are turned on.Climate control unit
PID/data monitor itemUnit/OperationData contentsModule control terminal
A/C_CTRL_STATAuto/OFF/AC•  Auto: A/C compressor control is in AUTO•  OFF: A/C compressor control is off•  AC: A/C compressor control is on—
A/C_MODE_CTRL_STATAuto/Vent/B/L/HEAT/H/D/DEF•  Auto: Airflow mode setting is in AUTO•  Vent: Airflow mode setting is in VENT•  B/L: Airflow mode setting is in BI-LEVEL•  HEAT: Airflow mode setting is in HEAT•  H/D: Airflow mode setting is in DEF/HEAT•  DEF: Airflow mode setting is in DEFROSTER—
A/C_SWOFF/ON•  OFF: A/C switch is off•  ON: A/C switch is on—
AMB_TEMP_INTERNAL°C, °FDisplays the cabin temperature detected by the passenger compartment temperature sensor.—
ATC_CTRL—Displays the air-conditioning control mode condition.—
AUTO_SWOFF/ON•  OFF: AUTO switch is off•  ON: AUTO switch is on—
CLIMATE_STATStopped/IP-ESU Indicater all ON Control•  Stopped: All of the indicators, display panel, and switch back lights on climate control unit are turned off•  IP-ESU Indicater all ON Control: All of the indicators, display panel, and switch back lights on climate control unit are turned on—
CRANKING_STAT—Displays during engine cranking or other than engine cranking.—
DEF_SWOFF/ON•  OFF: DEFROSTER switch is off•  ON: DEFROSTER switch is on—
DIM_CANCEL—Displays the dimmer cancel condition.—
FAN_CTRL_STATFAN OFF/FAN AUTO/Manual 1/Manual 2/Manual 3/Manual 4/Manual 5/Manual 6/Manual 7•  FAN OFF: Blower motor is stopped•  FAN AUTO: Blower motor is operating in auto control•  Manual 1: Blower motor is operating in manual 1•  Manual 2: Blower motor is operating in manual 2•  Manual 3: Blower motor is operating in manual 3•  Manual 4: Blower motor is operating in manual 4•  Manual 5: Blower motor is operating in manual 5•  Manual 6: Blower motor is operating in manual 6•  Manual 7: Blower motor is operating in manual 7—
FAN_DOWN_SWOFF/ON•  OFF: Airflow volume control switch (-) is not pressed•  ON: Airflow volume control switch (-) is pressed—
FAN_UP_SWOFF/ON•  OFF: Airflow volume control switch (+) is not pressed•  ON: Airflow volume control switch (+) is pressed—
GLOVE_BOX_LAMP_CTRLOFF/ON•  OFF: Glove compartment light is turned off•  ON: Glove compartment light is turned on—
HZRD_CTRL_STATOFF/ON•  OFF: Hazard system is not operating•  ON: Hazard system is operating—
HZRD_SWOFF/ON•  OFF: Hazard warning switch is off•  ON: Hazard warning switch is on—
ILLMI_MODE—Displays the illumination mode.—
ILLMI_POWER—Displays the illumination power supply condition.—
INTAKE_CTRL_STATAuto/REC/FRESH•  Auto: Air intake control setting is in AUTO•  REC: Air intake control setting is in REC•  FRESH: Air intake control setting is in FRESH—
MODE_SWOFF/ON•  OFF: MODE switch is off•  ON: MODE switch is on—
ON_OFF_SWOFF/ON•  OFF: POWER switch is off•  ON: POWER switch is on—
PNL_BRIGHT_LVL—Displays the panel light brightness.—
POWER_STAT—Displays the ignition switch condition.—
R_DEF_CTRL_STATOFF/ON•  OFF: Rear window defogger switch indicator is turned off (rear window defogger stopped)•  ON: Rear window defogger switch indicator is turned on (rear window defogger operating)—
R_DEF_SWOFF/ON•  OFF: Rear window defogger switch is off•  ON: Rear window defogger switch is on—
REC_SWOFF/ON•  OFF: RECIRCULATE/FRESH switch is off•  ON: RECIRCULATE/FRESH switch is on—
ROOM_FUSE_STAT—Displays the F27 25 A fuse condition.—
SEAT_HEAT_STAT_LOFF/Lo/Mid/Hi/AUTO•  OFF: Seat warmer switch (LH) indicator is turned off•  Lo: Seat warmer switch (LH) indicator is turned on at temperature level 1•  Mid: Seat warmer switch (LH) indicator is turned on at temperature level 2•  Hi: Seat warmer switch (LH) indicator is turned on at temperature level 3•  AUTO: ——
SEAT_HEAT_STAT_ROFF/Lo/Mid/Hi/AUTO•  OFF: Seat warmer switch (RH) indicator is turned off•  Lo: Seat warmer switch (RH) indicator is turned on at temperature level 1•  Mid: Seat warmer switch (RH) indicator is turned on at temperature level 2•  Hi: Seat warmer switch (RH) indicator is turned on at temperature level 3•  AUTO: ——
SEAT_HEAT_SW_LOFF/ON•  OFF: Seat warmer switch (LH) is off•  ON: Seat warmer switch (LH) is on—
SEAT_HEAT_SW_ROFF/ON•  OFF: Seat warmer switch (RH) is off•  ON: Seat warmer switch (RH) is on—
SET_TEMP_UNIT—Displays the display setting (Fahrenheit/Celsius) for the set temperature.—
STR_HEAT_STATOFF/Lo•  OFF: Steering warmer switch indicator is turned off•  Lo: Steering warmer switch indicator is turned on—
STR_HEAT_SWOFF/ON•  OFF: Heated steering wheel switch is off•  ON: Heated steering wheel switch is on—
SYNC_SWOFF/ON•  OFF: SYNC switch is off•  ON: SYNC switch is on—
TEMP_DOWN_SW_LOFF/ON•  OFF: Temperature control dial (LH) is not rotated left•  ON: Temperature control dial (LH) is rotated left—
TEMP_DOWN_SW_ROFF/ON•  OFF: Temperature control dial (RH) is not rotated left•  ON: Temperature control dial (RH) is rotated left—
TEMP_UP_SW_LOFF/ON•  OFF: Temperature control dial (LH) is not rotated right•  ON: Temperature control dial (LH) is rotated right—
TEMP_UP_SW_ROFF/ON•  OFF: Temperature control dial (RH) is not rotated right•  ON: Temperature control dial (RH) is rotated right—
VOLT_5VVDisplays the voltage for the 5 V power supply of the circuit in the climate control unit.—
VPWRVDisplays the power supply voltage (B+) to the climate control unit.—