Caution:
– A hot engine and exhaust system can cause severe burns. Turn off the engine and wait until they are cool before removing the exhaust system.
– Do not disconnect the connector between the PM sensor control module and PM sensor. Otherwise, it could adversely affect the PM sensor control module.

Relevant contents:

• Control system location, diagram, PCM and accelerator pedal position (APP) sensor [Skyactiv-D 1.8]
• Mass air flow (MAF) sensor, intake air temperature (IAT) sensor, engine oil coolant temperature (ECT) sensor and boost air temperature sensor [Skyactiv-D 1.8]
• Fuel pressure sensor, camshaft position (CMP) sensor, crankshaft position (CKP) sensor, PCM data reset and barometric pressure (BARO) sensor [Skyactiv-D 1.8]
• Intake shutter valve initialization, engine oil, supply pump, fuel injector, air fuel ratio (A/F) sensor, diesel particulate filter data rest, compulsory diesel particulate filter regeneration [Skyactiv-D 1.8]
• Timing chain learning, mass air flow sensor, intake air temperature sensor, revolution sensor, neutral sensor [Skyactiv-D 1.8]
• Manifold absolute pressure (map) sensor/boost air temperature sensor, barometric pressure sensor, accelerator pedal position sensor, air fuel ratio sensor and current sensor [Skyactiv-D 1.8]
• Exhaust gas temperature sensor, fuel temperature sensor, fuel injector injection amount correction and exhaust gas pressure sensor [Skyactiv-D 1.8]
• Engine oil temperature sensor/engine oil pressure sensor intake shutter valve position sensor, blow-by heater and i-stop off switch [Skyactiv-D 1.8]
• Clutch stroke sensor, power brake unit vacuum sensor, engine oil level sensor and exhaust shutter valve position sensor [Skyactiv-D 1.8]
• HP-EGR control valve position sensor and LP-EGR control valve position sensor [Skyactiv-D 1.8]
• Actuator position sensor (turbocharger with variable turbine geometry), coolant control valve position sensor and exhaust shutter valve initialization [Skyactiv-D 1.8]