Timing chain learning, mass air flow sensor, intake air temperature sensor, revolution sensor, neutral sensor [Skyactiv-D 1.8]
Caution:
– The timing chain learning can be performed when all the following conditions are met. The implementation conditions for the timing chain learning can be met by warming up the engine completely.
– The mass air flow (MAF) sensor data reset can be performed using the M-MDS. For details, follow the instructions displayed on the M-MDS.
– If the wiring harnesses or waterproof connectors are damaged, water penetrating the connector will cause a sensor malfunction. To prevent this, be careful not to damage wiring harnesses or waterproof connectors.
Mazda CX-30 2019-2024 |
1. Timing chain learning. [Skyactiv-D 1.8] |
2. Mass air flow (MAF) sensor data reset. [Skyactiv-D 1.8] |
3. Revolution sensor and neutral sensor inspection. [Skyactiv-D 1.8]. |
4. Mass air flow (MAF) sensor and intake air temperature (IAT) sensor No.1 No.2 No3. removal installation . [Skyactiv-D 1.8] |
1. Disconnect the negative battery terminal.
2. Remove the engine cover.
3. Disconnect the IAT sensor No.3 connector.
Relevant contents:
- Control system location, diagram, PCM and accelerator pedal position (APP) sensor [Skyactiv-D 1.8]
- Mass air flow (MAF) sensor, intake air temperature (IAT) sensor, engine oil coolant temperature (ECT) sensor and boost air temperature sensor [Skyactiv-D 1.8]
- Fuel pressure sensor, camshaft position (CMP) sensor, crankshaft position (CKP) sensor, PCM data reset and barometric pressure (BARO) sensor [Skyactiv-D 1.8]
- Intake shutter valve initialization, engine oil, supply pump, fuel injector, air fuel ratio (A/F) sensor, diesel particulate filter data rest, compulsory diesel particulate filter regeneration [Skyactiv-D 1.8]
- Manifold absolute pressure (map) sensor/boost air temperature sensor, barometric pressure sensor, accelerator pedal position sensor, air fuel ratio sensor and current sensor [Skyactiv-D 1.8]
- Exhaust gas temperature sensor, fuel temperature sensor, fuel injector injection amount correction and exhaust gas pressure sensor [Skyactiv-D 1.8]
- Engine oil temperature sensor/engine oil pressure sensor intake shutter valve position sensor, blow-by heater and i-stop off switch [Skyactiv-D 1.8]
- Clutch stroke sensor, power brake unit vacuum sensor, engine oil level sensor and exhaust shutter valve position sensor [Skyactiv-D 1.8]
- HP-EGR control valve position sensor and LP-EGR control valve position sensor [Skyactiv-D 1.8]
- Actuator position sensor (turbocharger with variable turbine geometry), coolant control valve position sensor and exhaust shutter valve initialization [Skyactiv-D 1.8]
- EGR temperature sensor inspection, pm sensor and NOx sensor [Skyactiv-D 1.8]