Control system location, diagram, PCM and accelerator pedal position (APP) sensor [Skyactiv-D 1.8]
Caution:
– When replacing the PCM, perform the configuration to assure that the system operates correctly.
– Because the PCM uses a waterproof connector, the inspection for the voltage/wave pattern cannot be performed. The following values are for reference.
– Because the PCM uses a waterproof connector, the inspection for the voltage/wave pattern cannot be performed. The following values are for reference.
– Because the APP sensor is integrated in the accelerator pedal, replacing the APP sensor includes replacement of the accelerator pedal.
Mazda CX-30 2019-2024 |
1. Control system location index. [Skyactiv-D 1.8] |
2. Control system diagram. [Skyactiv-D 1.8] |
3. PCM removal installation inspection. [Skyactiv-D 1.8]. |
4. Accelerator pedal position (APP) sensor inspection. [Skyactiv-D 1.8] |
– Do not touch the PCM connector terminal. The terminal is extremely thin and can be damaged by touching it.
– If the PCM connector is inserted at an angle and the lever is moved, the connector could be damaged. Verify that the PCM connector is inserted straight.
Relevant contents:
- Mass air flow (MAF) sensor, intake air temperature (IAT) sensor, engine oil coolant temperature (ECT) sensor and boost air temperature sensor [Skyactiv-D 1.8]
- Fuel pressure sensor, camshaft position (CMP) sensor, crankshaft position (CKP) sensor, PCM data reset and barometric pressure (BARO) sensor [Skyactiv-D 1.8]
- Intake shutter valve initialization, engine oil, supply pump, fuel injector, air fuel ratio (A/F) sensor, diesel particulate filter data rest, compulsory diesel particulate filter regeneration [Skyactiv-D 1.8]
- Timing chain learning, mass air flow sensor, intake air temperature sensor, revolution sensor, neutral sensor [Skyactiv-D 1.8]
- Manifold absolute pressure (map) sensor/boost air temperature sensor, barometric pressure sensor, accelerator pedal position sensor, air fuel ratio sensor and current sensor [Skyactiv-D 1.8]
- Exhaust gas temperature sensor, fuel temperature sensor, fuel injector injection amount correction and exhaust gas pressure sensor [Skyactiv-D 1.8]
- Engine oil temperature sensor/engine oil pressure sensor intake shutter valve position sensor, blow-by heater and i-stop off switch [Skyactiv-D 1.8]
- Clutch stroke sensor, power brake unit vacuum sensor, engine oil level sensor and exhaust shutter valve position sensor [Skyactiv-D 1.8]
- HP-EGR control valve position sensor and LP-EGR control valve position sensor [Skyactiv-D 1.8]
- Actuator position sensor (turbocharger with variable turbine geometry), coolant control valve position sensor and exhaust shutter valve initialization [Skyactiv-D 1.8]
- EGR temperature sensor inspection, pm sensor and NOx sensor [Skyactiv-D 1.8]