Battery [Skyactiv G X D]
Note:
– If the battery charge/discharge flow (number of times battery can operate) exceeds the specification, a DTC is recorded and the i-stop warning light (amber) flashes. If the battery charge/discharge flow (number of times the battery can operate) exceeds the specification, replace the battery with a new one.
– When replacing the battery, perform the following procedure: When replacing the PCM simultaneously, perform the PCM configuration first.
| Mazda CX-30 2019-2024 |
| 1. Battery removal/installation. [Skyactiv G (Without cylinder deactivation]. |
| 2. Battery removal/installation. [Skyactiv G (With cylinder deactivation]. |
| 3. Battery removal/installation. [Skyactiv X 2.0]. |
| 4. Battery removal/installation. [Skyactiv D 1.8]. |
| 5. Battery inspection [(E)] |
| 6. Battery recharging [(E)] |
| 7. Negative battery terminal disconnetion/connection[(E)] |
| 8. Battery condition initialization setting (i-stop setting) |
– Do not touch the PCM connector terminal. The terminal is extremely thin and can be damaged by touching it.
– If the PCM connector is inserted at an angle and the lever is moved, the connector could be damaged. Verify that the PCM connector is inserted straight.
Relevant contents: